Versions Compared

Old Version 11

changes.mady.by.user Jacob Steuber

Saved on

compared with

New Version 12

changes.mady.by.user Jacob Steuber

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  1. Install SprutCAM. Installation links are in the dropdown below for previous versions

Expand
titleSelect to dropdown

Version 14:  http://download.sprutcam.com/links/SprutCAM14AmericaSetup.exe

Version 12:  https://download.sprutcam.com/links/SprutCAM12Setup.exe 

Version 11:  https://download.sprutcam.com/links/SprutCAM11Setup.exe

Version 10:  https://download.sprutcam.com/links/SprutCAM10Setup.exe

Version 9:  https://download.sprutcam.com/links/SprutCAM9Setup.exe

Version 8: http://download.sprutcam.com/download/sprutcam/version-8/release_EN_RU.zip

Version 7: http://download.sprutcam.com/download/sprutcam/version-7/version-7.1.6/sprutcam-7.1.6.64105.exe

Version 2007: https://download.sprutcam.com/download/sprutcam/Version_2007/SprutCAM_2007.5.54.38366.exe

2. Once installed, follow the instructions in the dropdown below to create your account.

Expand
titleSelect to dropdown

  1. Select Create Account when the license manager opens

  2. Enter in the information below. This will be linked to your SprutCAM Account and used by technicians to verify your identity and provide support.

  3. The software will Activate the trial license, auto close, and then Open SprutCAM. If you receive a virtual machine error, please comment on the case that was created when requesting the trial. If you do not have a case, you may submit one here.

  4. A Welcome email will be sent from SprutCAM. Please save this as it has your login information for future trials and your licensing account.