...
Tormach has created new named parameters that can be used in G code programs, their name and functions are listed here.
Parameter Name | Function |
|---|---|
#<_motion_mode> | Returns the G value multiplied by 10 of G1/G2/G3/G5.2/G73/G80/G82/G83/G86/G87/G88/G89 (eg, G83 equals 830) |
#<_plane> | Returns the G value multiplied by 10 of G17/G18/G19/G17.1/G18.1/G19.1 (eg, G18.1 equals 181) |
#<_ccomp> | Returns the G value multiplied by 10 of G40/G41/G42 (eg, G40 equals 400) |
#<_ccomp_diameter> | Returns the diameter applied by cutter compensation, equivalent to parameter #5410 |
#<_metric> | Returns 1 if G21 is on |
#<_imperial> | Returns 1 if G20 is on |
#<_absolute> | Returns 1 if G90 is on |
#<_incremental> | Returns 1 if G91 is on |
#<_inverse_time> | Returns 1 if G93 is on |
#<_units_per_minute> | Returns 1 if G94 is on |
#<_units_per_rev> | Returns 1 if G95 is on |
#<_work_offset_number> | Returns 1-500 for the currently active work offset equivalent to G54.1 P# |
#<_tool_offset> | Returns 1 if G43 is on |
#<_retract_r_plane> | Returns 1 if G98 is set |
#<_retract_old_z> | Returns 1 if G99 is set |
#<_ |
work_ |
offset_ |
x> | Returns the G53 X axis offset for the current work coordinate |
#<_ |
work_ |
Returns 1 if G96 is on
#<_ijk_absolute_mode>
Returns 1 if G90.1 is on
#<_lathe_diameter_mode>
Returns 1 if G7 is on
#<_lathe_radius_mode>
Returns 1 if G8 is on
#<_spindle_on>
Returns 1 if the spindle is on
#<_spindle_cw>
Returns 1 if the spindle is on in the clockwise direction
#<_mist>
Returns 1 if M7 is on
#<_flood>
Returns 1 if M8 is on
#<_speed_override>
#<_feed_override>
#<_adaptive_feed>
#<_feed_hold>
#<_feed>
Returns the current active feedrate in the current machine units
#<_rpm>
Returns the current active RPM
#<_x>
Returns the current X position, equivalent to parameter #5420
#<_y>
Returns the current Y position, equivalent to parameter #5421
#<_z>
Returns the current Z position, equivalent to parameter #5422
#<_a>
Returns the current A position, equivalent to parameter #5423
#<_b>
Returns the current B position, equivalent to parameter #5424
#<_c>
Returns the current C position, equivalent to parameter #5425
#<_u>
Returns the current U position, equivalent to parameter #5426
#<_v>
Returns the current V position, equivalent to parameter #5427
#<_w>
offset_y> | Returns the G53 Y axis offset for the current work coordinate |
#<_work_offset_z> | Returns the G53 Z axis offset for the current work coordinate |
#<_work_offset_a> | Returns the G53 A axis offset for the current work coordinate |
#<_work_offset_b> | Returns the G53 B axis offset for the current work coordinate |
#<_work_offset_c> | Returns the G53 C axis offset for the current work coordinate |
#<_work_offset_ |
#<_work_offset_y>
u> | Returns the G53 U axis offset for the current work coordinate |
#<_work_offset_ |
#<_work_offset_b>
v> | Returns the G53 V axis offset for the current work coordinate |
#<_work_offset_ |
#<_work_offset_v>
w> | Returns the G53 W axis offset for the current work coordinate |
#<_tool_offset_x> | Returns the X axis offset for the currently active tool (on lathes the returned value will be half of what is shown in the tool table) |
#<_tool_offset_y> | Returns the Y axis offset for the currently active tool |
#<_tool_offset_z> | Returns the Z axis offset for the currently active tool |
#<_tool_offset_a> | Returns the A axis offset for the currently active tool |
#<_tool_offset_b> | Returns the B axis offset for the currently active tool |
#<_tool_offset_c> | Returns the C axis offset for the currently active tool |
#<_tool_offset_u> | Returns the U axis offset for the currently active tool |
#<_tool_offset_v> | Returns the V axis offset for the currently active tool |
#<_tool_offset_w> | Returns the W axis offset for the currently active tool |
#<_axis_offset_x> | Returns the value of an external offset applied to the X axis |
#<_axis_offset_y> | Returns the value of an external offset applied to the Y axis |
#<_axis_offset_z> | Returns the value of an external offset applied to the Z axis |
#<_axis_offset_a> | Returns the value of an external offset applied to the A axis |
#<_axis_offset_b> | Returns the value of an external offset applied to the B axis |
#<_axis_offset_c> | Returns the value of an external offset applied to the C axis |
#<_axis_offset_u> | Returns the value of an external offset applied to the U axis |
#<_axis_offset_v> | Returns the value of an external offset applied to the V axis |
#<_axis_offset_w> | Returns the value of an external offset applied to the W axis |
#<_x_machine> | Current G53 machine coordinates of the X axis |
#<_y_machine> | Current G53 machine coordinates of the Y axis |
#<_z_machine> | Current G53 machine coordinates of the Z axis |
#<_a_machine> | Current G53 machine coordinates of the A axis |
#<_b_machine> | Current G53 machine coordinates of the B axis |
#<_c_machine> | Current G53 machine coordinates of the C axis |
#<_u_machine> | Current G53 machine coordinates of the U axis |
#<_v_machine> | Current G53 machine coordinates of the V axis |
#<_w_machine> |
#<_current_tool>
#<_current_pocket>
#<_value>
#<_value_returned>
#<_task>
#<_call_level>
Current G53 machine coordinates of the W axis | |
#<_probe_result> | Returns the result of a G38 probe result, equivalent to parameter #5070 |
#<_probe_x> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5061 |
#<_probe_y> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5062 |
#<_probe_z> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5063 |
#<_probe_a> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5064 |
Lathe Specific Parameters
...