...
Tormach has created new named parameters that can be used in G code programs, their name and functions are listed here.
Parameter Name | Function | Read/Write |
|---|---|---|
#<_motion_mode> | Returns the G value multiplied by 10 of G1/G2/G3/G5.2/G73/G80/G82/G83/G86/G87/G88/G89 (eg, G83 equals 830) | |
#<_plane> | Returns the G value multiplied by 10 of G17/G18/G19/G17.1/G18.1/G19.1 (eg, G18.1 equals 181) | |
#<_ccomp> | Returns the G value multiplied by 10 of G40/G41/G42 (eg, G40 equals 400) | |
#<_ccomp_diameter> | Returns the diameter applied by cutter compensation, equivalent to parameter #5410 | |
#<_metric> | Returns 1 if G21 is on | |
#<_imperial> | Returns 1 if G20 is on | |
#<_absolute> | Returns 1 if G90 is on | |
#<_incremental> | Returns 1 if G91 is on | |
#<_inverse_time> | Returns 1 if G93 is on | |
#<_units_per_minute> | Returns 1 if G94 is on | |
#<_units_per_rev> | Returns 1 if G95 is on | |
#<_work_offset_number> | Returns 1-500 for the currently active work offset equivalent to G54.1 P# | |
#<_tool_offset> | Returns 1 if G43 is on | |
#<_retract_r_plane> | Returns 1 if G98 is set | |
#<_retract_old_z> | Returns 1 if G99 is set | |
#<_work_offset_x> | Returns the G53 X axis offset for the current work coordinate | |
#<_work_offset_y> | Returns the G53 Y axis offset for the current work coordinate | |
#<_work_offset_z> | Returns the G53 Z axis offset for the current work coordinate | |
#<_work_offset_a> | Returns the G53 A axis offset for the current work coordinate | |
#<_work_offset_b> | Returns the G53 B axis offset for the current work coordinate | |
#<_work_offset_c> | Returns the G53 C axis offset for the current work coordinate | |
#<_work_offset_u> | Returns the G53 U axis offset for the current work coordinate | |
#<_work_offset_v> | Returns the G53 V axis offset for the current work coordinate | |
#<_work_offset_w> | Returns the G53 W axis offset for the current work coordinate | |
#<_tool_offset_x> | Returns the X axis offset for the currently active tool (on lathes the returned value will be half of what is shown in the tool table) | |
#<_tool_offset_y> | Returns the Y axis offset for the currently active tool | |
#<_tool_offset_z> | Returns the Z axis offset for the currently active tool | |
#<_tool_offset_a> | Returns the A axis offset for the currently active tool | |
#<_tool_offset_b> | Returns the B axis offset for the currently active tool | |
#<_tool_offset_c> | Returns the C axis offset for the currently active tool | |
#<_tool_offset_u> | Returns the U axis offset for the currently active tool | |
#<_tool_offset_v> | Returns the V axis offset for the currently active tool | |
#<_tool_offset_w> | Returns the W axis offset for the currently active tool | |
#<_axis_offset_x> | Returns the value of an external offset applied to the X axis | |
#<_axis_offset_y> | Returns the value of an external offset applied to the Y axis | |
#<_axis_offset_z> | Returns the value of an external offset applied to the Z axis | |
#<_axis_offset_a> | Returns the value of an external offset applied to the A axis | |
#<_axis_offset_b> | Returns the value of an external offset applied to the B axis | |
#<_axis_offset_c> | Returns the value of an external offset applied to the C axis | |
#<_axis_offset_u> | Returns the value of an external offset applied to the U axis | |
#<_axis_offset_v> | Returns the value of an external offset applied to the V axis | |
#<_axis_offset_w> | Returns the value of an external offset applied to the W axis | |
#<_x_machine> | Current G53 machine coordinates of the X axis | |
#<_y_machine> | Current G53 machine coordinates of the Y axis | |
#<_z_machine> | Current G53 machine coordinates of the Z axis | |
#<_a_machine> | Current G53 machine coordinates of the A axis | |
#<_b_machine> | Current G53 machine coordinates of the B axis | |
#<_c_machine> | Current G53 machine coordinates of the C axis | |
#<_u_machine> | Current G53 machine coordinates of the U axis | |
#<_v_machine> | Current G53 machine coordinates of the V axis | |
#<_w_machine> | Current G53 machine coordinates of the W axis | |
#<_probe_result> | Returns the result of a G38 probe result, equivalent to parameter #5070 | |
#<_probe_x> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5061 | |
#<_probe_y> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5062 | |
#<_probe_z> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5063 | |
#<_probe_a> | Returns the coordinates of a G38 probe trip, equivalent to parameter #5064 |
...