Versions Compared

Version Old Version 8 New Version 9
Changes made by

Jacob Steuber

Jacob Steuber

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If you do not have your user ID/Password, please create a ticket here and be sure to send a 4 digit pin to reset the PW to.

  1. Install the version that applies. Installation links are in the dropdown below for all versions

Expand
titleSelect to dropdown

Version 16: https://download.sprutcam.com/links/SprutCAM_X_Setup.exe

Version 15: https://download.sprutcam.com/links/SprutCAM15Setup.exe

Version 14:  http://download.sprutcam.com/links/SprutCAM14AmericaSetup.exe

Version 12:  https://download.sprutcam.com/links/SprutCAM12Setup.exe 

Version 11:  https://download.sprutcam.com/links/SprutCAM11Setup.exe

Version 10:  https://download.sprutcam.com/links/SprutCAM10Setup.exe

Version 9:  https://download.sprutcam.com/links/SprutCAM9Setup.exe

Version 8: http://download.sprutcam.com/download/sprutcam/version-8/release_EN_RU.zip

Version 7: http://download.sprutcam.com/download/sprutcam/version-7/version-7.1.6/sprutcam-7.1.6.64105.exe

  1. You will now need to login and activate the seat. Open the dropdown to proceed.

Expand
titleSelect to dropdown

  1. Login with the information provided through the Welcome email that was sent during account creation or used throughout the life of your current version.

    Image Modified


  2. Once signed in, you will see a list of licenses to activate. Simply check the green check mark to activate the seat. Click Run SprutCAM in the bottom right to start the software.

    Image Modified

  3. Repeat these steps on each computer.