Versions Compared

Old Version 4

changes.mady.by.user Sam Bollen

Saved on

compared with

New Version 5

changes.mady.by.user Sam Bollen

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Remove the rear panel of the console.

  2. Examine the USB cable going from the header on the computer motherboard to connector J12 on the control board.

  3. If you are able to move the RPM, Feed Override, and Max Velocity sliders with your finger or mouse, the USB daughter board will need to be replaced. (PN 39146)

Internal Operator Console Layout

Expand
titleInternal Operator Console Layout CLICK TO EXPAND
image-20240112-204420.png

  1. Computer

  2. VMC Console Controller (for all inputs and pendant control)

  3. DB25 Connector for Pendant

  4. LED light ribbon cable from control board to front panel of console

image-20240112-204954.png

  1. USB connection from motherboard to control board

  2. 26 pin ribbon cable from DB25 connector for pendant

  3. E-Stop circuit connection

  4. Cycle Start and Feedhold button inputs

  5. Key switch input

  6. Potentiometer board ribbon cable

  7. Front panel LED connector

image-20210115-131456.png

The Potentiometer Board is accessed under the bottom angled sheet metal, on the rear of console.

...