In This Section, You'll Learn:
...
Secure workpieces with appropriate workholding devices (like a milling vise or strap clamps).
Verify that the workpiece is adequately secured.
Position clamps and workholding devices clear of any tool paths.
Remove cutoff workpieces and other large chips before starting the machine.
Never leave tools, stock, or other loose items inside the machine.
Electrical Safety
WARNING! Electrical Shock Hazard: You must power off the machine before making any electrical connections. If you don't, there's a risk of electrocution or shock.
Power off the machine before servicing.
Use an approved lockout/tagout system to secure the machine's Main Disconnect in the OFF position before servicing the machine.
Understand that certain electrical components can retain dangerous electrical voltages, even after the machine is powered off and all power is removed from the system.
Understand that certain installation, maintenance, and troubleshooting procedures — for the machine and certain accessories — require access to or modification of wiring inside of the electrical cabinet. Only qualified electrical machinery technicians shall perform these procedures.
Confirm that the mains voltage conforms to requirements before connecting the machine.
...
This is a section of the 1100MX operator's manual. To view the whole manual, go to Tormach document UM10586.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.