Install the Oiler
...
Connect the existing oil line on the mill to the oil line on the oiler.
Attach three mounting tabs to the machine stand with three M5 × 10 mm screws.
Route the power cord on the oiler to the back of the electrical cabinet, and connect it to any of the Accessory outlets.
Fill the oiler's sreservoir reservoir with machine oil to about 80% full.
...
This is a section of the 1100MX operator's manual. To view the whole manual, go to Tormach document UM10586.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.