In This Section, You'll Learn:
...
Never allow swarf to accumulate on or within the machine.
Never use flammable liquids (like alcohol, diesel fuel, or kerosene) in the machine’s coolant system.
Never use water, coolants without rust inhibitors, or straight cutting oil in the machine’s coolant system.
Tooling
Use appropriate speeds, feeds, and cutting parameters for your machine, machine operation, material, and tooling.
Use tools and tool holders that are suitable for the current operation.
Examine tools for signs of damage. Replace any damaged tools as soon as you find them.
...
Never use unbalanced tooling or spindle fixtures.
Never use tools that are larger or longer than necessary.
Never use tools at speeds above their operational limits.
Workholding
Secure workpieces with appropriate workholding devices (like a milling vise or strap clamps).
Verify that the workpiece is adequately secured.
Position clamps and workholding devices clear of any tool paths.
Remove cutoff workpieces and other large chips before starting the machine.
Never leave tools, stock, or other loose items inside the machine.
...
This is a section of the 1100MX operator's manual. To view the whole manual, go to Tormach document UM10586.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.