Page Comparison

Unpack the Machine Crate

...

1. Put on work gloves and eye protection.

2. Cut and remove the steel straps on the shipping crate with snips.

3. Disassemble the shipping crate with a hammer and pry bar. Start with removing the top, followed by the four sides.

4. Remove and discard the plastic wrap from the machine.

   1. Inspect the item(s):

   2. Photograph any damage that may have occurred during shipping.

5. Verify the received goods against the packing list.
   If there is any damage or shortages, you must contact Tormach within 30 days of receipt. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.

6. Cut and remove the shipping straps securing the tool bag and Emergency Stop box to the pallet.

...

For safety and security, use the Lifting Bar Kit (PN 31446) to lift the machine from above.

...

1. Inspect the lifting chain for any broken links, and all other parts to make sure that there are no breaks or imperfections. If you find any broken links or imperfections, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.

2. Use a clean rag to remove any shipping grease from all components in the Lifting Bar Kit and from the surface of the machine table.

...

This is a section of the 770MX operator's manual. To view the whole manual, go to Tormach document UM10587.

If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.