Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

For finishing (optional): T2 is a 2mm carbide ballnose end mill, PN 39171

Set up the tool setter

If you decide the run the finishing program you will want to setup the tool setter to measure the heights of the tools:

Set up the workpiece and fixture

...

Install Tool 1 in the spindle.  

Find the work offset (X0Y0Z0)

The work offset for the program is located top back left corner of the stock box.

...

 

Load the demo program and run the program.

...