Versions Compared

Old Version 3

changes.mady.by.user Sam Bollen

Saved on

compared with

New Version Current

changes.mady.by.user Sam Bollen

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Verify the Installation

...

  1. Power on the machine and bring it out of Reset.

  2. Select the Page Up key on the keyboard to move the spindle head up (Z+).

  3. Remove and discard the shipping block from the machine table.

  4. Reference the axes: from the PathPilot interface, select Ref Z, Ref X and Ref Y.

...

  1. Use the keyboard to verify axes motion:

    1. Select the Right Arrow key and then the Left Arrow key.
      The table moves left (X+), then right (X-).

    2. Select the Down Arrow key and then the Up Arrow key.
      The table moves away from you (Y-), then toward you (Y+).

    3. Select the Page Down key and then the Page Up key.
      The spindle head moves down (Z-), then up (Z+).

  2. If applicable, verify the optional Jog Shuttle:

    1. Press any axis button on the Jog Shuttle — X, Y, Z, or A — to select an axis.

...

This is a section of the 770MX operator's manual. To view the whole manual, go to Tormach document UM10587.

If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.