IMPORTANT! Please read this section before you begin installing your Automatic Tool Changer (ATC).
...
Product Information
Product: Automatic Tool Changer (ATC) for 770MX (PN 39290)
The Automatic Tool Changer (ATC) holds up to 10 tools in a single tray. If your program requires more tools, the ATC changes tools automatically for all tools assigned to the tray, and pauses for a manual tool change for all tools not assigned to the tray.
...
NOTE: If any items are missing, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.
...
NOTE: If the VFD Running light did not come on in the previous step, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.
...
Adjust for the ATC's backlash: apply light pressure forward and backward on the carousel; then, from the PathPilot interface, on the ATC tab, select ++ or -- until there's equal space on the front and the back of the BT30 taper.
Verify that, from the Status tab, the ATC Tray In LED is still illuminated.
If the LED isn't illuminated, examine the tool tray. It may have exceeded the Tray In sensor during adjustments in the previous step.Repeat adjustments until the tool's shank is concentric with the spindle.
Move the Z-axis up: in the MDI Line DRO field, type G20 G53 G1 Z0 F20. Then select the Enter key.
Remove the tool from the ATC. Then, select Retract.
...
From the PathPilot interface, on the ATC tab, type the tool number in the Remove DRO field. Then select the Enter key.
...
Select Remove.
The ATC fetches the tool from the tray.Unload the tool from the spindle.
From the ATC tab, select ATC FWD or ATC REV.
...
From the PathPilot interface, on the ATC tab, in the Insert DRO field, type the tool number. Then select the Enter key.
Select Go To Tray Load Position.
The spindle head moves up and the ATC moves into the door open position.Select Delete.
...
Depending on your workflow, do one of the following from the PathPilot interface:
Type the command directly into the MDI Line DRO field using the following format: T[TOOL NUMBER] M06
For example, T1 M06
Type the tool number in the Tool DRO field. Then select the Enter key.
Switch to Manual Tool Changes
From the PathPilot interface, on the Settings tab, select the Manual Tool Change radio button.
The Automatic Tool Changer (ATC) is prevented from making tool changes.
...