...
CO2 DRAGSTER DEMO 1 ROUGHING.nc
View file name CO2 DRAGSTER DEMO1 ROUGHING.txt CO2 DRAGSTER DEMO 1 FINISHING.nc, an optional finishing program that can be run after the roughing program to provide a smooth finish.
View file name CO2 DRAGSTER DEMO 1 FINISHING.txt CO2 DRAGSTER DEMO FIXTURE.nc, a program for cutting the fixture plate from a 1/4" piece of MDF or Plywood.
...
CO2 Dragster Demo 1 can be cut on the xsTECH router in a single setup. There are two programs:
CO2 Dragster Demo 1 Roughing.nc is the roughing program.
View file name CO2 DRAGSTER DEMO1 ROUGHING.txt CO2 Dragster Demo 1 Finishing.nc is an optional tool path for finishing
View file name CO2 DRAGSTER DEMO 1 FINISHING.txt
...