Performance Expectations
...
Travels | |
X-Axis | 10" (254 mm) |
Y-Axis | 6.25" (159 mm) |
Z-Axis | 10" (254 mm) |
Spindle-to-Table Maximum Clearance | 12" (305 mm) |
Spindle Centerline to Machine Column | 6.5" (165 mm) |
Spindle | |
Spindle Power | 0.75 hp (0.56 kW) |
Spindle Maximum Speed | 10,000 rpm |
Transmission | Poly-V Belt |
Spindle Taper | R8 |
Thread Machining | Thread Mill |
Maximum Feed Rate | |
X- and Y-Axis | 135 IPM (3.43 m/min) |
Z-Axis | 110 IPM (2.7 m/min) |
Axis Motor | Stepper Driven |
Power | |
Primary Power Required | Single-Phase 115 Vac, 50/60 Hz |
Recommended Circuit Amperage | Dedicated 15 A breaker |
Table | |
Table Size | 18" × 6.3" (457 mm × 160 mm) |
T-Slot Size | 3/8" (9.5 mm) (three slots) |
Maximum Weight on Table | 150 lb (68 kg) |
Overall Dimensions | |
Machine Size | 42" × 36" (1.1 m × 0.9 m) |
Overall System Height | 72" (1.8 m) |
Typical System Weight | 600 lb (272 kg) |
Looking for more information?
This is a section of the PCNC 440 operator's manual. To view the whole manual, go to Tormach document UM10372.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.