IMPORTANT! Please read this section before you begin installing your Automatic Tool Changer (ATC).
...
Product Information
Product: Automatic Tool Changer (ATC) for PCNC 440 (PN 35900)
The Automatic Tool Changer (ATC) holds up to eight tools in a single tray. If your program requires more tools, the ATC changes tools automatically for all tools assigned to the tray, and pauses for a manual tool change for all tools not assigned to the tray.
Quantity | Description |
2 | Adjustable Standoff Assembly (PN 35833) |
1 | ATC Assembly |
1 | Fixed Standoff Assembly (PN 35832) |
1 | |
10 | Plastic Screw (PN 32173) |
1 | Tilt Standoff Assembly (PN 35911) |
NOTE: If any items are missing, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.
...
Required Tools for Installation
8 in. dowel for Tormach Tooling System (TTS) tool holder
NOTE: The dowel cannot be longer than 8 in.1-1/2 in. adjustable wrench
Metric hex wrench set
Phillips screwdriver
PCNC 440 Power Drawbar Kit (PN 35927)
NOTE: You must install the PCNC 440 Power Drawbar on your machine before installing the PCNC 440 Automatic Tool Changer (ATC). Do not install the power drawbar button — tool changes can be made on the ATC.Small, flat-head screwdriver
Snips
Socket wrench and a 13 mm socket
Tormach Tooling System (TTS) tool holder
...
Air Pressure 90-120 psi (620-825 kPa)
If the air supply is more than 120 psi (825 kPa), you must use a regulator.Air Volume For successive, back-to-back tool changes, at least 2 cfm at 90 psi is required.
Exact air volume depends on the frequency of tool changes.Dry Air We recommend using a compressed air dryer, desiccator, or filter between the air compressor and the machine.
Lubricated Air You must lubricate the air with air tool oil.
Use the FRL Filter-Regulator-Lubricator (PN 38829) (included with the power drawbar kit) for this purpose.
...
(Optional) Install the FRL Filter-Regulator-Lubricator
| Anchor | ||||
|---|---|---|---|---|
|
The FRL Filter-Regulator-Lubricator (PN 38829) is an optional accessory for the Automatic Tool Changer (ATC) that lubricates the air with air tool oil. For information on installation and use, see the documentation that ships with the FRL Filter-Regulator-Lubricator.
...
To view a PDF version of your manual, go to Tormach document TD10487.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.