...
...
Purpose:
This document details installation of the PCNC 1100 full enclosure. Prior to enclosure installation, first install the Control Relocation Kit (PN 33302).
PCNC 1100 Enclosure | Qty. | PN |
Enclosure Light Cover Window | 5 | 34435 |
Lamp 115 VAC | 5 | 34436 |
Enclosure Large Door Window | 4 | 34433 |
Enclosure Side Window | 2 | 34434 |
Control Relocation Kit | 1 | 33302 |
#7 Drill | 1 | 34507 |
#21 Drill | 1 | 34521 |
10-32 Tap | 1 | 34569 |
1/4-20 Tap | 1 | 34570 |
Tap Wrench | 1 | 36041 |
...
IMPORTANT! Due to minor stand inconsistencies, you may need to drill/tap extra holes to fasten some parts to the machine base.
...
Enclosure Installation
In preparation for enclosure installation, remove the stainless steel cover strip along front of the machine stand (see Figure 1).
Remove the side/rear splash guards from both sides of chip pan (see Figure 1).
...