IMPORTANT! Please read this section before you begin installing your Automatic Tool Changer (ATC).
...
Product Information
Product: Automatic Tool Changer (ATC) for PCNC 770 Series 3 (PN 39008)
The Automatic Tool Changer (ATC) holds up to 10 tools in a single tray. If your program requires more tools, the ATC changes tools automatically for all tools assigned to the tray, and pauses for a manual tool change for all tools not assigned to the tray.
Automatic Tool Changer (ATC) for 770M | |
Quantity | Description |
1 | ATC Assembly |
3 | ATC Fixed Standoff Assembly (PN 38492) |
10 | Plastic Screw (PN 32173) |
1 | ATC Tilt Adjust Eccentric Standoff Assembly (PN 38493) |
M Machine ATC Retrofit for PCNC 770 Series 3 (PN 39006) | |
Quantity | Description |
3 | 5/16-18 × 3/4 Socket Head Cap Screw (PN 39010) |
3 | M8 × 1.25 - 20 Socket Head Cap Screw (PN 39307) |
1 | ATC Legacy Adapter Cable (PN 38661) |
1 | |
1 | M Machine ATC Carousel Plate Spacer (PN 39005) |
NOTE: If any items are missing, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.
...
1-1/2 in. adjustable wrench
Marker
Metric hex wrench set
Phillips screwdriver
Small, flat-head screwdriver
Snips
Socket wrench and a 13 mm socket
...
Remove the plastic wire protectors from the ferrule ends.
Use a small, flat-blade screwdriver to connect the following wires to the J10 connector:
Wire 408 to pin 3
Wire 403 to pin 4
Wire GND to pin 5 (depending on the age of your ATC, the GND wire may already be grounded to the ATC box. If so, there is no need to connect it to the ATC board.)
Plug the J10 connector back in the ATC board.
Close the lid on the ATC main assembly and lock it.
...
NOTE: If the VFD Running light did not come on in the previous step, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.
...