...
...
...
...
If you have an automatic oiler, view those instructions here.
Install the Oiler
Find the hardware installed on the left side of the machine stand, as shown in the following image.
...
Pull and release the plunger on the oiler until oil is pushed through the distribution system. After that, pull the plunger at the following times:
Every time you power on the mill
Every four hours of operation
You must verify the installation before you install any additional components. If you are not installing any additional components, you still must verify the core installation before you use the machine for the first time. Go to Verify the Core Installation.
Looking for more information?
This is a section of the 1100MX operator's manual. To view the whole manual, go to Tormach document UM10586.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.