In This Section, You'll Learn:
...
Create work offsets.
For information, see Set Work Offsets.Understand how you're jogging the machine.
For information, see View the Active Axis to Jog; View the Current Machine Position; View the Distance to Go.Quickly determine which G-code modes are active.
For information, see View the Active G-Code Modes.Change the spindle speed or feed rate.
For information, see Change the Feed Rate; Change the Spindle Speed Command Mode.
Manual Control Area
...
From the Manual Control area, you can do the following activities either before starting or after running a G-code program:
Move the machine axes.
For information, see Jog the Machine.Preset a G30 position.
For information, see Use a G30 Position.Reference the machine axes.
For information, see Reference the Machine.
Keyboard Shortcuts
The following table lists the keyboard shortcuts in PathPilot.
...
Install an Update File from a USB Drive
| Anchor | ||||
|---|---|---|---|---|
|
From the PathPilot support center, download the most recent PathPilot update file.
Transfer the PathPilot update file to a USB drive.
Put the USB drive into the PathPilot controller.
Confirm that the PathPilot controller is powered on and out of Reset mode.
From the Status tab, select Update.
...
Select the desired update file, and then select Update.
The update file is installed on the PathPilot controller.Follow the on-screen instructions to restart the PathPilot controller.
Looking for more information?
This is a section of the 15L 8L operator's manual. To view the whole manual, go to Tormach document UM10225UM10753.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.