A list of all operations, when to use them, and a guide to each.
Operation | When to Use | Guide |
|---|---|---|
Hole Machining | Drilling/Tapping/Hole Pocketing | |
FBM Mill | Feature Based Machining | |
Pocketing | ||
Engraving | ||
2D Contouring | ||
2.5D Pocketing | ||
2.5D Flat Land | ||
2.5D Wall Machining | ||
2.5D Contouring | ||
Face Milling | ||
Roughing Waterline | ||
Finishing Waterline | ||
Roughing Plane | ||
Finishing Plane | ||
Flat Land | ||
Optimized Plane | ||
Complex | ||
3D Contouring | ||
Scallop | ||
3D Helical | ||
Morph | ||
5D Surfacing | ||
5D by Meshes | ||
5D Contouring | ||
Rotary Waterline | ||
Rotary Roughing | ||
Rotary Finishing | ||
Morph 4D | ||
4D Surfacing | ||
4D Contouring | ||
5 Axis Multi Surface | ||
5 Axis Swarf | ||
Impeller Blade Surface Swarf | ||
Impeller Floor Surface with Tilt Curve | ||
Impeller Floor Surface without Tilt Curve | ||
Impeller Roughing | ||
Projection | ||
Cavity with Tilt Curve | ||
Cavity with Tilt Curve and Collision Control | ||
Electrode Machining | ||
Turbine Blade Rotary Machining | ||
Corners Cleanup | ||
Pencil | ||
Chamfering | ||
Jet Cutting | ||
5D Plasma Cutting | ||
5D Jet Cutting | ||
Plasma HyperTherm | ||
Jet Cutting 5D | ||
Disc Roughing | ||
Disc Cutting 2D | ||
Disc Cutting 6D | ||
Group | ||
Multiply Group | ||
Auxiliary Operation | ||
G-Code Based | ||
Make SHaped Cutter | ||
0 Comments