USB Dongle Installation (Upgrade)

You will receive an email with a link to a case. Inside that case will be your SprutCAM seat upgrade. This is so you have access to it later should you lose your hard drive or in the past, your email. Once you have this, please follow the instructions below. You will need to have access to hidden folders. If you find you cannot find Program data, please go here to turn on hidden folders.

Pick your Installation and download/install

Select to dropdown

Version 14: http://download.sprutcam.com/links/SprutCAM14AmericaSetup.exe

Version 12: https://download.sprutcam.com/links/SprutCAM12Setup.exe

Version 11: https://download.sprutcam.com/links/SprutCAM11Setup.exe

Version 10: https://download.sprutcam.com/links/SprutCAM10Setup.exe

Version 9: https://download.sprutcam.com/links/SprutCAM9Setup.exe

Version 8: http://download.sprutcam.com/download/sprutcam/version-8/release_EN_RU.zip

Version 7: http://download.sprutcam.com/download/sprutcam/version-7/version-7.1.6/sprutcam-7.1.6.64105.exe

Version 2007: https://download.sprutcam.com/download/sprutcam/Version_2007/SprutCAM_2007.5.54.38366.exe

Go to C:\ProgramData\Sprut Technology\Licence
Place the .STJ file into this folder
If you have .STJC files, please continue onto 5. If you do not, with your current dongle plugged in, open the software
Go to C:\ProgramData\Sprut Technology\Common Licenses
Place the .STJC files into this folder
Open the software with the USB dongle plugged in.

USB Dongle Installation (Upgrade)

0 Comments