Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Current »

The video below goes into detail the differences between Setup Stage, Part, and Copy of Part under Structure. A step by step walkthrough is provided for a simple one sided part as well as a part with a flip (G54, G55). Fixturing, Adding Fixtures to SprutCAM (Tormach Models) , is also present and the article linked will cover that.

Model Used:

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.