Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

  1. Install SprutCAM. Installation links are in the dropdown below for all versions

2. Once installed, follow the instructions in the dropdown below to login and activate the new versions trial.

 Select to dropdown

  1. Login with the information provided through the Welcome email that was sent during account creation. If you do not have this, please contact support@sprutcamamerica.com with a 4 digit pin to reset the PW to.


  2. Once signed in, you will see a list of licenses to activate. On this page will also be the days remaining on the licenses before they expire. Simply check the green check mark to activate the seat. Click Run SprutCAM in the bottom right to start the software.

  3. Repeat these steps on each computer.



  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.