Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

The motion system is the machine’s muscles. It is what moves the table, head, or end effector from point A to point B. This is typically done with signals from the controller sent to a to a driver, and that driver commanding a motor.

  • Steppers/Servos, Drivers, etc.

Troubleshooting Pages

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.