Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »



Minimum (small and medium projects)

Recommended (large projects)

OS   *, **

Windows Vista x64

Windows 10 x64

CPU

64-bit

64-bit

Memory

4 GB RAM

32 GB RAM

Video

OpenGL-capable card (OpenGL 1.2) 512 MB

OpenGL-capable card (OpenGL 1.5) 1 GB or higher

Storage

HDD with at least 5GB free space

Solid State Drive (SSD) with at least 10GB free space

Monitor

1280x960 or higher, 65535 colors or better

1920x1080 or higher, true color, dual monitors

Pointing Device

Microsoft Mouse-compliant

3Dconnexion 3D mouse-compliant

Internet

 

A DSL internet connection or faster


Note :        The recommended configuration of the computer much depends on the complexity of the models to be machined and machining quality. The more complex the model is, and the higher the machining quality required, the greater number of calculations will be needed to perform, in order to generate the  tool  movement toolpath. Therefore, the higher specification of the computer, the faster the calculations will be performed.

  • SprutCAM is not supported on Apple Macintosh® -based machines. Some customers have shown success in running SprutCAM in a Virtual Windows environment on Mac computers using Boot Camp or any Windows emulator (Wine, Parallels Desktop, VirtualBox, VMware Fusion, CrossOver, etc.). While the end user may choose to run Windows on a MAC®, this is not supported by SprutCAM.

** Anti-Virus Software: Most computers today have some kind of anti-virus software to protect from unwanted malware. In some cases these have been found to interfere with applications such as SprutCAM which are running on the PC.  SPRUT Technology does not recommend particular products but if you see unexpected issues, it may be a clash with anti-virus software. Out software are checked by Kaspersky Antivirus service, Avast company and we are trusted for our software. Try temporarily disabling the anti-virus software or setting an exception for SprutCAM.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.