Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Background

One of the basic steps in any machine shop is to make sure your work holding vise is square to your tooling. If you do this properly, you'll have less need to set up the vise each and every time you need it.

https://www.youtube.com/watch?v=qaoh4MF862g

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.