Motion System Troubleshooting
The motion system is the machine’s muscles. It is what moves the table, head, or end effector from point A to point B. This is typically done with signals from the controller sent to a to a driver, and that driver commanding a motor.
Steppers/Servos, Drivers, etc.
Troubleshooting Pages
- All Axes Won't Move When Commanded - 1100M
- Can't Reference All Axes - 1100M
- Axis Movement is Noisy - 1100M
- Lost Motion Testing - 1100M
- Mill Gib/AC Bearing Adjustment and Backlash Compensation - 1100M
- One Axis Won't Move (or Only Moves in One Direction), and Other Axes Move - 1100M
- Ballscrew Replacement
- Limit Switch Troubleshooting for "M" Machines