1100M/MX Installation
Background
This video will cover the installation of the Tormach 1100M and 1100MX mills. The majority of this installation will show the 1100M, but any differences on the MX will be shown concurrently. The installation of the 770MX is very similar and you should have no issue following along using this video. In this video we cover everything needed from when your machine arrives in the crate, functional checks of the machine operation.
Tools
4 mm hex wrench (included in tool bag)
1500-lb capacity engine hoist
Assistant to help you
Combination wrench set
Consumables, like:
Anti-seize
Air tool oil
Machine way oil
Digital multimeter
Hammer
Level (2 ft)
Lifting Bar Kit (PN 31446)
Pallet jack
Phillips screwdriver (included in tool bag)
Pry bar
Reciprocating saw (or similar) to break down the pallet
Safety eyewear that meets ANSI Z87+
Shears or knife
Socket set
Step ladder
Snips
Work gloves