Motion System Troubleshooting
The motion system is the machine’s muscles. It is what moves the table, head, or end effector from point A to point B. This is typically done with signals from the controller sent to a to a driver, and that driver commanding a motor.
Steppers/Servos, Drivers, etc.
Troubleshooting Pages
- Mill Gib/AC Bearing Adjustment and Backlash Compensation - PCNC 770
- Lost Motion Testing - PCNC 770
- Limit Switch Troubleshooting for PCNC 770 and 1100
- Ballscrew Replacement
- Axis Movement is Noisy - PCNC 770
- One Axis Won't Move (or Only Moves in One Direction), and Other Axes Move - PCNC 770
- All Axes Won't Move When Commanded - PCNC 770
- Can't Reference All Axes - PCNC 770
- PCNC 1100 and 770 Series 1 and Series 2 Dip Switches