Performance Expectations
Each machine ships with a Certificate of Inspection, which details quality assurance measurements performed by members of our quality assurance team prior to shipping.
Cutting Performance
This machine is capable of cutting a wide variety of materials (for information, see Intended Use) at or near their recommended feeds and speeds. Make sure that your workpiece is held as rigidly as possible and use the most rigid tooling available for roughing cuts. Verify that the programmed operations do not exceed the available spindle power.
Spindle Speed Range
Two speed ranges are available:
Low 175 rpm to 3250 rpm
High 525 rpm to 10,000 rpm
Spindle Power Rating 1.5 hp (1.1 kW)
Maximum Feed Rate
X- and Y-Axis 135 IPM (3.43 m/min)
Z-Axis 110 IPM (2.7 m/min)
Resolution and Accuracy
Accuracy is heavily influenced by the techniques that the machinist uses. A skilled machinist can deliver accuracy that exceeds the specified accuracy from the manufacturer; an inexperienced machinist may have difficulty delivering the specified accuracy. We can't predict operator accuracy, but the specified accuracy is an important reference point.
Resolution 0.0001"
NOTE: The resolution of motion is the minimum discrete positional move.
Ball Screw Positional Accuracy ≤ 0.0006 in./ft
Positional Accuracy ≤ 0.0013 in./ft
NOTE: The positional accuracy includes additional contributing factors (like compressibility of bearings, ball screw windup, and friction).
Machine Specifications
Travels | |
X-Axis | 14" (356 mm) |
Y-Axis | 7.5" (191 mm) |
Z-Axis | 13.25" (337 mm) |
Spindle-to-Table Maximum Clearance | 14.25" (362 mm) |
Spindle Centerline to Machine Column | 8.6" (218 mm) |
Spindle | |
Spindle Power | 1.5 hp (1.1 kW) |
Spindle Maximum Speed | 10,000 rpm |
Transmission | Poly-V Belt |
Spindle Taper | R8 |
Thread Machining | Tension/Compression, Auto-Reversing, Thread Mill |
Maximum Feed Rate | |
X- and Y-Axis | 135 IPM (3.43 m/min) |
Z-Axis | 110 IPM (2.7 m/min) |
Axis Motor | Stepper Driven |
Power | |
Primary Power Required | Single-Phase 115 Vac, 50/60 Hz |
Recommended Circuit Amperage | Dedicated 15 A breaker |
Table | |
Table Size | 26" × 8" (660 mm × 203 mm) |
T-Slot Size | 5/8" (15.9 mm) (three slots) |
Maximum Weight on Table | 400 lb (181 kg) |
Overall Dimensions | |
Machine Size | 56" × 49" (1.4 m × 1.2 m) |
Overall System Height | 88" (2.2 m) |
Typical System Weight | 950 lb (431 kg) |
Looking for more information?
This is a section of the 770M operator's manual. To view the whole manual, go to Tormach document UM10539.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.