...
The PathPilot conversational page allows the user tab (on the Conversational tab) allows you to add commands that interact with a connected PathPilot CNC machine to a robot program. Available commands include:
Request that the connected machine tool execute any valid MDI G-code command.
Request that the connected machine tool start the currently loaded G-code program.
Wait for the connected machine tool to be in one of the following states: Ready, Idle, Disconnected, Running, Estop.
...
Add a Command
Select the appropriate connected machine tool from the Instance drop-down menu.
Select the type of command you wish to add using the
...
radio buttons on the left of the screen.
Select Add To Program.
Note: If no instances of PathPilot CNC applications are available
...
in the Instance drop-down menu, use the Settings
...
tab to establish a connection to your PathPilot machine tool (
...
for more information, go to Connect a PathPilot-
...
...
.