Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

UNKNOWN ATTACHMENT

The Set tab (on the Conversational tab) allows you to add commands that change the state of digital outputs to the robot program. You can rename the digital outputs, which could make robot programs easier to read or understand. For example, you could rename digital output 1 to fj_open.

Add a Set Command to a Robot Program

  1. Use the drop down menu to select the desired output and the Low/High radio button to select the desired state, then select Add To Program. The resultant command is added to the program.
    For more information on the Set command, go to Tormach Robot Programming Language.

  • No labels