Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Background

The Tormach PathPilot Operator Console is a great upgrade for the 770M/MX and 1100M/MX machines as it lets you operate your 770M, 770MX, 110M and 1100MX machine with built-in hardware knobs for the feeds and speeds overrides, and a hand-held jog pendant for the precise positioning of your machine. If you are tending to another machine, the RGB status light will give you an indication of your job status from across the shop. This PathPilot Operator Console installation is only to be completed on machines that have the Tormach Machine Enclosure pre-installed, as it is mounted to the front panels. Be sure to read all the warnings, cautions and requirements in the installation manual before you begin.

Tools

  • 15/64 in. drill bit

  • Electric drill

  • Hole punch

  • Level

  • Metric hex wrench set

  • Phillips screwdriver

  • Phillips screwdriver, small

  • Scissors

  • Ruler

  • Tape

https://youtu.be/gv6c5Zv5cOU
  • No labels