Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 18 Next »

Background

The monitor display allows you to use PathPilot. The monitor needs power, video input, and – for touch screens – a USB cable.

The operator console is an all-in-one system and might require different troubleshooting. For operator console troubleshooting steps, go to https://tormach.atlassian.net/wiki/spaces/IMK/pages/2848653533/Operator+Console+Won+t+Work .

Table of Contents

Reseat the power cable

Reason: The monitor isn't plugged in to an outlet.

 Standard Monitor

  1. Unplug and re-plug the monitor’s power cable from both the accessory port (IEC) and the monitor itself (IEC).

 Touch Screen Monitor

  1. Unplug and re-plug the monitor’s power cable from the accessory port (IEC), the transformer (IEC), and the monitor itself (barrel jack).

Reseat the video cable

Reason: The monitor isn't plugged in to the controller or the cable isn't working.

 HDMI Cable

  1. Unplug and re-plug the HDMI monitor cable from both the controller and the monitor. Then restart the controller to test. If the monitor still doesn’t work, go to Step 2.

  2. Replace the video cable with a known good HDMI cable from a TV or another computer. Then restart the controller to test.

 VGA Cable

  1. Unplug and re-plug the VGA monitor cable from both the controller and the monitor. Then restart the controller to test. If the monitor still doesn’t work, go to Step 2.

  2. Replace the VGA cable with a known good HDMI cable from a TV or another computer. Then restart the controller to test.

Touch screen isn't responding

Reseat the USB cable (touch screen only)

Reason: The USB cable isn't plugged in to the monitor or computer

  1. Unplug and re-plug the USB cable from both the controller and the monitor. Then restart the controller to test. If the monitor still doesn’t work, go to Step 2.

  2. Replace the USB cable with a known good USB cable from another computer. Then restart the controller to test.

Recalibrate the touch screen (touch screen only)

Reason: The touch screen is incorrectly calibrated.

  1. From the PathPilot interface, in the MDI Line DRO field, type ADMIN TOUCHSCREEN and press the Enter key on the keyboard. Then follow the onscreen prompts to calibrate the touch screen.

We’re constantly updating PathPilot, so we always recommend updating to the current version. To find the file to download, go to the PathPilot Update page on our website.

Delete pointercal.xinput file (touch screen only)

Reason: File could be corrupted.

  1. Go to the ‘FILE’ tab in PathPilot. Press the home button.

  2. Locate the pointercal.xinput file and highlight it.

  3. Press the delete button.

  4. Upon restarting the controller, PathPilot should prompt you to go through the touch screen calibration.

  • No labels