Background

The 1300PL Plasma Table was designed to be easily delivered and installed by the customer. It arrives on a pallet, so no forklift is necessary, just a couple 4 x 4's and an engine hoist to remove it from the pallet and tip it down to the ground. We estimate that it will take approximately two hours to setup and start running.

Tools

• Tin snips

• Flat-blade screwdriver

• Pliers

• 3mm, 4mm, 5mm, 6mm hex key

• Dead-blow hammer

• Utility knife

• Adjustable crescent wrench

• Pallet jack

• Engine hoist, forklift, or gantry crane

• Lifting sling (2200lb / 1000kg minimum rating)