How do I change BIOS power setting on my PathPilot controller?

Owned by Katie Frantz
Jan 22, 2021
1 min read

You can change the power-on behavior of your PathPilot controller so that it will automatically turn on when xsTECH Router is switched on.

  1. Enter the BIOS by pressing ESC key to enter the system BIOS menu on the initial boot screen of the controller

  1. Choose ADVANCED tab, and then choose POWER BUTTON CONTROL

  1. Change the RESTORE AC POWER LOSS setting to POWER ON

  2. On the SAVE AND EXIT tab, choose SAVE CHANGES AND RESET