Installing Educational Seats

Version 17: https://download.sprutcam.com/links/SprutCAM_X_17_Setup.exe

Version 16: https://download.sprutcam.com/links/SprutCAM_X_Setup.exe

Version 15: https://download.sprutcam.com/links/SprutCAM15Setup.exe

Version 14:  http://download.sprutcam.com/links/SprutCAM14AmericaSetup.exe

Version 12:  https://download.sprutcam.com/links/SprutCAM12Setup.exe 

Version 11:  https://download.sprutcam.com/links/SprutCAM11Setup.exe

Version 10:  https://download.sprutcam.com/links/SprutCAM10Setup.exe

Version 9:  https://download.sprutcam.com/links/SprutCAM9Setup.exe

Version 8: http://download.sprutcam.com/download/sprutcam/version-8/release_EN_RU.zip

Version 7: http://download.sprutcam.com/download/sprutcam/version-7/version-7.1.6/sprutcam-7.1.6.64105.exe

1. Login with the information provided through the Welcome email that was sent during account creation. If you do not have this, please contact support@sprutcamamerica.com with a 4 digit pin to reset the PW to.
   
   

   Open

   

   
   
   

2. Once signed in, you will see a list of licenses to activate. On this page will also be the days remaining on the licenses before they expire. Simply check the green check mark to activate the seat. Click Run SprutCAM in the bottom right to start the software.
   
   
   

   Open

   

    

3. Repeat these steps on each computer.